Macun çekme nasıl yapılır
.Hello friends. We're with our brother, Enver. Today we're going to put some paste on you. We will tell you the stages. In the first stage we wear 120 sandpaper. Putty for adhesion We're detecting the locations of the dent. We're sanding Now we are wiping the paste to hold it. How much do we use. Instead of migration according to. First, we're gonna fill the punch and put the paste back on it. sealant. Tighten hardener 2%. We must mix well. Paste mixed beautifully. Now to practice We are going through. We need to know where the loser is What should be the direction? Direction loser line Must be pulled along the opposite direction of the paste. Wave from above It should be taken according to the direction of the board. Grasp steel to be smooth We put it first, then press and pull..
It's an effort that requires dexterity. . Then we take the leftovers. We're making a layer layer. suppress at 40 degrees.